Home About Us Contact Us
Miller Spectrum 375 X-Treme
My Project 2-001
Pay Pal
GSA Contract Holder
TxMas Contract Holder
hub
bbbaccredited
GAWDA
Bill Me Later
Our Products

Miller Spectrum 375 X-Treme

  • Miller Spectrum 375 X-Treme(Image 1)

Spectrum 375 X-Treme

3/8" mild steel capacity, Auto-Line and MVP Plugs make this 18 lb unit the most portable plasma cutting system in the market!

  • Rated Cutting Capacity - The rated cutting capacity is based on traveling approximately 10 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed you typical cutting thickness requirements.
  • Protective X-Case - Miller's X-Case provides ultimate protection during transport and storage. Additional space ideal for MVP plugs, consumable box, as well as gloves, eye protection, ect.
  • Versatility - Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 115-230 VAC, single phase power, 50/60 Hz, without removing the covers to relink the power source.
  • Can Be Powered by Miller Engine Drives - With 4000 watts of generator power (e.g. Bobcat) or equivalent competitive equipment.
  • MVP Multi-Voltage Plug - Miller's multi-voltage plug allows connection to 115 or 230 V receptacles without tools - choose the plug that fits the receptacle and connect it to the power cord.
  • Portability - Portable in the shop or at the job site. It's 18 lb weight and shoulder strap allow the end user to easily move from location to location.
  • Factory Pre-Set Air - No need to adjust the air pressure! The unit automatically regulates the air pressure to the torch.
  • Wind Tunnel Technology and Fan-On-Demand - Internal air flow that protects electrical components and PC boards from dirt, dust and debris, greatly improving reliability. Cooling system only operates when needed. In dirty or dusty environments, this feature reduces teh amount of airborne dust / dirt pulled through the unit.
  • Material Cutting Capacity - .004" (0.1 mm) to 3/8" (9.5 mm) in mild steel
  • Input Power - 115/230 volts, 1 phase, 50/60 Hz
  • Rated Output - 240V (27A) @ 92 VDC, 35% duty cycle / 120V (20A) @ 92 VDC, 20% duty cycle / 120V (15A) @ 88 VDC, 35% duty cycle
  • Welding Amperage Range - 14-27 amps
  • Weight - 18 lbs (8.2 kg) with torch 

Manufactured By = Miller Electric Mfg
Manfuacturer Part = 907529

Due to this products shipping weight & flucuating Freight costs, Please call us to order. 325-651-1408

$1,440.00
MILL 907529

Visit us on Facebook!
Copyright   2011 | Cross Texas Supply, LLC | All rights reserved.
mediajaw web design and hosting